中文   MENU

Copyright © 2018 Shandong Dayi Chemical Co.,Ltd All Rights Reserved 

Powered by:www.300.cn 鲁ICP备09073120号 

 鲁公网安备 37068202000296号

PRODUCTS

DY- A Three Parts Water-Proof AgentDY- B Three Parts Water-Proof AgentDY- C Three Parts Water-Proof Agent

basic information
heat
没有此类产品
Detail

DESCRIPTION

DY-ABC Three Parts Water-Proof Agent is a 3 parts siloxane/silane water repellent. Part A and Part B are water-diluted active siloxane polymer emulsion. Part C is catalyst. This product is a reactive emulsion especially designed for use as a durable water repellent.

SPECIFICAITON

Appearance

Milky white liquid

Milky white liquid

 

Solid Content (%)

30±2

30±2

>99

PH

6~8

4~6

---

Centrifugal stability (1500r/min)

15 minutes non-separation

---

---

APPLICATIONS

1. Water repellent for fabrics such as canvas, umbrella cloth, and ski suit.

2. On construction materials such as cement mortar exteriors, mineral wool, plasterboard, calcium silicate board, cement bridges, stones, cement pavement.

3. Other potential applications.

HOW TO USE

DY-3 Parts Water Repellent is supplied as a three-part kit (Part A, Part B and Part C). Portions in ratio of A:B:C=80:20:5 must be blended together prior to use. Use clean water to dilute the mixed material to 1~3% solid content system. Part C should be diluted with 20 parts of water at temperature 80℃ and agitate until completely dissolved prior to adding to the diluting water. Then add Part A and Part B in above ratio to the diluting water and mix thoroughly.

Apply the final bath to the substrate by dipping, spraying and brushing. Maximum repellency can be obtained when the treated surface/substrate are dried and cured.

Textile applications: First, dipping and padding for two times, then pre-dry at temperature of 100℃, and finally dry at temperature of 150~180℃ until maximum repellency obtained. To enhance effect of water repellency, 2D resin and water-soluble epoxy resin are recommended.

Construction material applications: The treated substrate should be air dried at ambient conditions or dried briefly at elevated temperature.

PRODUCT SAFETY INFORMATION

1. When on store, Part B may separate. Drum rolling is suggested to obtain uniform material which has no negative effect to the properties of the material.

2. The final bath must be used within 24 hours. Agitate the bath gently until homogenization prior to use again within the usable 24 hours.

STORAGE

1. Store the product in the original, unopened containers at room temperature.

2. The usable life of Part A and Part C is 12 months from date of manufacture.

3. The usable life of Part B is 3 months from date of manufacture.

PACKAGING

Part A is supplied in 50 kg plastic pails. Part B is supplied in 10 kg plastic pails. Part C is supplied in plastic pails or packages.

SHIPPING

Ship the product as non-dangerous good.

The next article
DY-V110-2 Methyl Vinyl Silicone Crude Rubber